Ulead VIDEOSTUDIO 11 User Manual page 45

Controlling the DV camcorder with the Navigation Panel
When capturing from a DV camcorder, use the Navigation Panel to scan your
footage and locate the scenes you want to capture.
High Definition Videos
You can import high definition video from your HD, DVD or Hard Disk Drive (HDD)
camcorders.
To capture high definition videos:
1. Connect your HDV camcorder to your computer's IEEE-1394 port using the
IEEE-1394 cable.
2. Turn on your camcorder and switch it to Play/Edit mode and make sure that
your HDV camcorder is switched to HDV mode.
Note: For Sony HDV camcorders, flip open the LCD screen and see if HDVout I-Link is on
the LCD screen to check if the camera is set to HDV mode. If you see DVout I-Link, press
P-MENU at the lower right of the screen. In the menu, press MENU> STANDARD SET>
VCR HDV/DV and press HDV.
3. Click Capture on the Step Panel. In the Options Panel, click
Digital TV or DVB-T video
Before capturing, have the DVB-T source connected via a compatible capture card
installed on your computer first.
To capture DVB-T video:
1. Click the Capture Step then click Capture Video.
2. In the Capture Step Options Panel, select Digital TV Source from the Source
list.
3. Click Options and select Video Properties.
4. In Channel List, click Start Scan to start scanning for channels.
Shuttle Slider
Drag the Shuttle Slider to move forward and back
through the footage at variable speeds. This is a quick
way to find scenes you are looking for in your video.
ULEAD VIDEOSTUDIO USER GUIDE
.
45