Ulead PHOTOIMPACT 11 User Manual page 98

98 ULEAD PHOTOIMPACT USER GUIDE
Note: Images without these data can also be used but the result may be limited.
2. There are two ways you can use
SmartRemove:
• Auto Automatically
removes moving objects
from the images (at least
3). Once Auto is clicked,
automatic brush-out
strokes are shown. Next,
jump to Step 6 below.
• By Brush Lets you
manually select the
objects you want to
remove from the images.
3. Click an image in the Image
List Panel. Select the image
where there is an object you
want to remove.
Tip: For best result, select an
image with the minimum
number of objects to be
removed, and then click Set
as key image (the lock
button).
4. Click Brush-out and drag over
the objects you want to
remove.
5. Click Brush-in and drag over the objects you want retained.
Tips:
• You don't need to be precise in marking the objects. They only have to be more
or less covered by the brush strokes.
• Select at least two images in the Image List Panel, and select Show brush-out
result of stacked images to preview superimposed result of these selected
images.
6. Click SmartRemove. The result is shown in the Preview Window. To make
further changes, click SmartRemove again and continue with auto or brush
options.
7. Click OK.
Result after applying SmartRemove