Philips RC2573GR User Manual page 34

• If SSB FIRMWARE is selected, the
digital module software, including MPEG
2 and MPEG 4, is updated from the USB
device.
SW DOWNLOAD
SOURCE
DIRECTION DOWNLOAD
SW TYPE SSB FIRMWARE
START
• If STANDBY FIRMWARE is selected,
the startup data is updated from the
USB device.
SW DOWNLOAD
SOURCE
DIRECTION DOWNLOAD
SW TYPE STANDBY FIRMWARE
START
• If IBOARD NVM is selected, the TV
settings are updated from the USB
device.
SW DOWNLOAD
SOURCE
DIRECTION DOWNLOAD
SW TYPE IBOARD NVM
START
• If IBOARD FIRMWARE is selected,
the iboard software is updated from the
USB device.
SW DOWNLOAD
SOURCE
DIRECTION
SW TYPE
START
USB
>
• After all the selections for the
DOWNLOAD have been completed,
select START.
SW DOWNLOAD
SOURCE
DIRECTION
SW TYPE
START
USB
>
• Press Æ to start. The TV will start to
perform the SW download. Upon
successful downloading, the TV will shut
down and re-start automatically.
D Note: It is strongly recommended in
the SW TYPE to select ALL. This
ensures all available software upgrades
are installed.
USB
RF Source
>
*Only available on certain models.
• If RF is selected in the SOURCE
option, only downloading can be
performed.
USB
DOWNLOAD
IBOARD FIRMWARE
>
SW
USB
DOWNLOAD
IBOARD FIRMWARE
>
33