Entertainment Systems - Radio/Cd - GMC 2004 YUKON DENALI Manual

Entertainment Systems —
Radio/CD
Set the time on radios without a
Radio Data System (RDS)
• Press and hold the HR or MIN arrow
for two seconds.
• Press the HR (down) arrow until the
correct hour appears on the display.
• Press and hold the MIN (up) arrow
until the correct minute appears on
the display.
Set the time on radios with a Radio
Data System (RDS)
Your radio may have a button marked
"H" or "HR" to represent hours and an
"M" or "MIN" to represent minutes.
• Press and hold the hour button until
the correct hour appears on the
display.
• Press and hold the minute button
until the correct minute appears on
the display.
Note: The time may be set with the
ignition on or off.
Program radio station presets
• Turn the radio on.
• Press BAND to select the band (AM,
FM1/FM2/XM1/XM2).
• Use the seek or tune knob to tune in
the desired station.
• Press AUTO EQ or AUTO TONE (as
applicable to your radio) to select the
equalization that best suits the type of
station selected.
• Press and hold one of the six num-
bered buttons until a beep sounds;
release the button.
• Repeat these steps for each station
preset, using a different numbered
button for each station.
Access one of the two available XM
Satellite Radio bands (if equipped)
• Press the BAND button until XM1 or
XM2 appears on the display. (Note:
Requires subscription to XM Radio.)
7