Table of Contents
Advertisement
4. Push in gently on the bulb, turn it counterclockwise
and remove it from the socket.
5. Put the new bulb into the socket, gently press in on
the bulb and turn it clockwise until it is tight.
6. Put the socket back into the lamp assembly and turn
it clockwise until it locks.
7. Put the parking/turn signal lamp assembly back into
the vehicle and tighten the four screws.
3. Pull the socket out of
the lamp assembly.
Front Sidemarker Lamps
(Composite Headlamps)
2. Reach through the opening and turn the sidemarker
bulb socket counterclockwise and remove it.
yellowblue
1. Remove the four screws
and pull out the
parking/turn signal
lamp assembly.
6-43
Advertisement
Table of Contents
