Front Turn Signal Lamps - GMC SIERRA CK2 1999 Owner's Manual

5. Put the new bulb into the assembly and turn it
clockwise until it is tight.
6. Plug in the electrical connector.
7. Put the headlamp lens assembly back into the
vehicle. Install and tighten the two hex head pins.
4. Turn the bulb
counterclockwise
and remove it.

Front Turn Signal Lamps

(Sealed Beam Headlamps)
2. Remove the lamp assembly by swinging it out from
the inside edge and sliding it out at the outside edge.
3. Squeeze the tab on the side of the lamp socket while
turning the socket counterclockwise.
yellowblue
1. Remove the two screws
at the inside edge of
the parking/turn signal
lamp assembly.
6-41