Disassembly Sequence Chart; Preparing The Expansion Base For Disassembly - HP Xb3000 - Notebook Expansion Base Docking Station Maintenance And Service Manual

5.2 Disassembly Sequence Chart

Use the chart below to determine the section number to be
referenced when removing computer components.
Section Description
5.3 Preparing the Expansion Base
for Disassembly
5.4 Installing an Optional Hard Drive
Hard drive carrier
Hard drive rear panel
Hard drive
5.3 Preparing the Expansion Base
for Disassembly
Perform the following steps before disassembling the
expansion base:
1. If the computer is in the expansion base, turn off the
computer and disconnect the expansion cable from
the computer.
2. Remove the computer from the expansion base.
3. Disconnect the AC adapter and all external devices from
the expansion base.
Maintenance and Service Guide
Disassembly Sequence Chart
Removal and Replacement Procedures
# of Screws Removed
1
2
4
5–3