If You Have Trouble With Your Regular Telephone Service - ADEMCO 4286 - Phone Module User Manual

In the event of trouble with your regular
telephone service, disconnect the security
system from the
removing the plug from the RJ31X (CA38A
in Canada) telephone wall jack (you should
have been shown how to do this by your
installing company). DO NOT ATTEMPT
TO REMOVE THE TELEPHONE LINE
CONNECTION IN
CABINET OR AT
MODULE – THIS
COMPLETE DISRUPTION
REGULAR TELEPHONE SERVICE.
If the regular phone
correctly after the
disconnected from the RJ31X wall jack, the
security system has a problem and you
should call your installing company for
service immediately. If, upon
If You Have Trouble with Your
Regular Telephone Service
telephone line by
THE CONTROL
THE PHONE
WILL CAUSE
OF
service works
plug has been
disconnection of the security system from
the RJ31X wall phone jack, there is still a
problem with telephone service, notify the
telephone company that they have a
problem and request
service.
Important:
If the phone service is at fault in this test,
re-insert the plug immediately; if the
security system is at fault, re-insert the
plug as soon as the security system is
repaired. Remember that the security
system relies on this connection for
communication with
monitoring station.
The user may not under any circumstances
(in or out of warranty) attempt any service
or repairs to the security system.
prompt repair
your alarm
29