Conditions That Terminate A Phone Access Session - ADEMCO 4286 - Phone Module User Manual

The phone access session may be terminated at any time by the user
hanging up. Phone access will also be terminated under the following
conditions:
If no touch tones have been entered and the system has made no
announcements for 20 seconds.
Phone access sessions are limited to 5 minutes or a sequence of
250 key presses, after which the system will end the session with
the word "GOODBYE" (time permitting).
A remote access session (call-in) will be terminated immediately if
an alarm dialer report is triggered in the system. This ensures
immediate notification of the alarm to the alarm monitoring
station. A remote access session may also be terminated if the
valid phone and system security codes had not already been
entered when other types of dialer reports are triggered.
If a user hangs up to terminate a phone session, they should wait
approximately 2 minutes prior to calling for phone access again
otherwise they may receive a busy signal.
Conditions that Terminate
a Phone Access Session
19