Adding Memory - Sony PCV-L630 - Vaio Slimtop Computer User Manual

1. Shut down your computer and turn off all peripheral devices, such as your printer.
2. Unplug your computer and any peripheral devices.
3. Remove the cover as described in
4. Locate the available expansion slot. Then, remove the screw and then the slot cover.
5. Install the add-in board by plugging it into the expansion slot.
6. Attach any internal cables that the board requires (see the manual for the add-in board).
7. Reinstall the screw and replace the cover.
8. Connect all peripheral devices and AC power, and then turn on the computer.

Adding Memory

The computer has two memory slots. For memory upgrades, use only 3.3V unbuffered 4-clock
64-bit, 100 MHz SDRAM DIMM modules.
To install memory
Make sure you observe the proper safety precautions when you add DIMMs to your Sony computer.
See Notes on Use in the VAIO
1. Shut down your computer and turn off all peripheral devices, such as your printer.
2. Unplug your computer and any peripheral devices.
3. Remove the cover as described in
4. If necessary, remove any cables, add-in cards, or other components to access the DIMM
Removing the Cover
Consumer Information Guide.
®
Removing the Cover
.
.
Page 873