Epson S041885 - Storyteller Photo Book Creator Manual page 70

Printing a Full-Length Cover
See your printer documentation for detailed paper loading and printing instructions. Your printer may not load from
the top, as described here, and your printer software may look different.
Note: Avoid touching the glossy surface of the StoryTeller paper as much as possible to avoid fingerprints.
1
Before loading the StoryTeller cover sheet in
your printer, flatten it by gently bending it in the
opposite direction (for example, at the flaps
and spine).
2
Load the sheet glossy side up against the right
side of the feeder.
Note: If your printer loads from the front like an HP
printer, load the paper glossy side down.
3
Slide the left edge guide up against the paper, but not too tightly.
4
Lower the output tray and pull out the output tray extensions, if your printer has them.
70
Print Your Cover