Connect Power Cables; Turn The Power On - Westinghouse L1951NW - 19" - DVI Wide LCD Monitor User Manual

3. Connect Power Cables

Connect the AC power cord to the LCD Monitor (to the connector labeled "AC-IN") and
then connect the cord into a properly grounded AC outlet.

4. Turn the Power On

Press the power button on the side of the LCD monitor. The LED light will turn green if
a signal input is detected or it will be orange if no input is detected.
NOTE: If you have a problem with the video image, adjust the computer's resolution
to 1440 x 900 or turn off and reboot the computer. In addition, you may need to
download the latest drivers for the graphics card used in your computer.
10