Table of Contents
Advertisement
Tips & Troubleshooting
EN
My Alpine KCE-425i isn't working, what's wrong?
First, be sure that your Alpine KCE-425i is powered on. Next, make sure that you are
in the desired mode - On-Screen Navigation Mode or iPod Mode. To change modes,
simply push the Mode Button on your Remote Control. See Remote Control
Functions (page7)
Sometimes NEXT
seems not to work?
While Album art is loaded, the remote commands are not executed immediately. One
command will be stored and executed when the full album art is loaded. In the normal
menu screen, this blackout time usually starts 3 seconds after playback of a song
begins and can take 7 seconds, depending on the iPod model. In 'Now Playing' mode
the blackout starts immediately and takes up to 15 seconds.
Please refer to (page16)
My audio is distorted, how can I improve it?
Files on your iPod can come from many different sources (i.e. iTunes store, ripping
your own CDs, Podcasts etc.). The audio levels on these differ widely. The fixed
volume setting in the set-up menu leaves usually enough headroom to avoid distortion
by clipping. If this is not enough, enable the volume control (SETTINGS-AUDIO
SETTINGS-VARIABLE) and lower the volume as needed.
15
Advertisement
Table of Contents
