Table of Contents
Advertisement
Tips & Troubleshooting
EN
Switching Between NTSC and PAL
The Alpine KCE-425i default broadcast format is NTSC. However, it is PAL
compatible too. If you have a screen that is configured for PAL and your iPod's video
format is set for PAL, simply select the PAL setting in Alpine KCE-425i Settings.
All Alpine screens are native NTSC screens, therefore we recommend that you set
your iPod and KCE-425i to NTSC video format for best picture quality.
To toggle between NTSC and PAL settings, follow the steps below:
NTSC to PAL
1. Be sure you are on the Main Menu Screen
NOTE: Your iPod must be removed from the Alpine KCE-425i before attempting to
change formats.
2. Press the Left Arrow Button
once, then the Down Arrow Button
once.
Repeat.
This will switch your video output from NTSC to PAL.
PAL to NTSC
1. Be sure you are on the Main Menu Screen
NOTE: Your iPod must be removed from the Alpine KCE-425i before attempting to
change formats.
2. Press the Left Arrow Button
once, then the Up Arrow Button
once.
Repeat.
This will switch your video output from PAL to NTSC.
14
Advertisement
Table of Contents
