Configuring Session Limits - NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Reference Manual

2. To create a new bandwidth profile, click add. The Add Bandwidth Profile menu will display.
Figure 4-16
3. Enter the following data in the Bandwidth Profile section:
a. Enter a Profile Name. This name will become available in the firewall rules definition
menus.
b. Enter the Minimum Bandwidth and Maximum Bandwidth to be allowed.
c. From the Type pull-down box, select whether the profile will apply to a group or
individual.
d. From the Direction pull-down box, select whether the profile will apply to outbound or
inbound traffic.
4. Click Apply. The new bandwidth profile will be added to the list.

Configuring Session Limits

To prevent one user or group from using excessive system resources, you can limit the total
number of IP sessions allowed through the FVS318G for an individual or group. You can specify
the maximum number of sessions by either a percentage of maximum sessions or an absolute
number of maximum sessions. Session limiting is disabled by default.
To configure session limits:
Firewall Protection and Content Filtering
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
1.1 November, 2009
4-31