NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Reference Manual page 30

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
To manually configure your Broadband ISP Settings:
1. Select Network Configuration > WAN Settings > Broadband ISP Settings and enter the
following:
2. In the ISP Login options, choose one of these options:
Figure 2-6
• If your ISP requires an initial login to establish an Internet connection, click Yes (this is
the default).
• If a login is not required, click No and ignore the Login and Password fields.
3. If you clicked Yes, enter the ISP-provided Login and Password information.
4. In the ISP Type options, select the type of ISP connection you use from the three listed
options. (By default, "Other (PPPoE)" is selected, as shown below.
Figure 2-7
(If your connection is PPPoE or PPTP, your ISP will require an initial login.)
2-8 Connecting the FVS318G to the Internet
1.1 November, 2009