Configuration File Management - NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Reference Manual

Figure 7-5
You can edit the System Contact, System Location, and System name.

Configuration File Management

The configuration settings of the VPN firewall are stored within the firewall in a configuration file.
This file can be saved (backed up) to a user's PC, retrieved (restored) from the user's PC, or
cleared to factory default settings.
Once you have installed the VPN firewall router and have it working properly, you should back up
a copy of your settings to a file on your computer. If necessary, you can later restore the VPN
firewall router settings from this file. The Settings Backup and Firmware Upgrade screen
allows you to:
• Back up and save a copy of your current settings
• Restore saved settings from the backed-up file.
• Revert to the factory default settings.
• Upgrade the VPN firewall router firmware from a saved file on your hard disk to use a
different firmware version.
Backup and Restore Settings
To backup settings:
Router and Network Management
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
1.1 November, 2009
7-15