Leaving Your Vehicle; Sliding Side Door - GMC SAFARI 2004 Owner's Manual

program mode any time by turning the ignition to RUN.
The locks will automatically lock and unlock to
indicate that you are leaving the program mode. If the
lock/unlock switches are not pressed while in the
programming mode, the auto lock/unlock setting will not
be modified.
The following is a list of the available programming
options:
•
All doors lock/Only the driver's door unlocks:
Press the lock side of the power lock switch on
the door panel once and then the unlock side once.
•
All doors lock/All doors unlock: Press the
lock side of the power lock switch on the door panel
once, and then the unlock side twice.
•
All doors lock/None of the doors unlock: Press
the lock side of the power lock switch on the door
panel once, and then the unlock side three times.
•
No doors lock/None of the doors unlock: Press
the lock side of the power lock switch on the door
panel twice. This turns off the automatic lock
feature.
For more information, see your dealer.
2-8

Leaving Your Vehicle

If you are leaving your vehicle, take your key, open your
door and set the locks from inside. Then get out and
close the door.

Sliding Side Door

To open the sliding side door, pull the handle toward
the back and slide the door to the rear until it rests in the
open position.
To close the sliding side door, pull the handle toward
the front and slide the door forward.