Chapter 3 Overview Of Your Monitor; Front Panel Overview; Chapter 4 Operation Direct-Access Features; Power Indicator - YAKUMO TFT 17 XP Manual

Chapter 3

3.1 Front Panel overview

AUTO
2
2 3
1.Menu Button
To push menu button turns on the menu, and it activates the items you highlight .
2.Select Button
To choose which function you need .you may choose
" " Clockwise.
3.Auto Button
Auto adjust the display mode to its utmost performance according to VGA setting.
( )
4.Power Button
Use this button to turn the monitor on and off.

5.Power indicator

3
Overview of your monitor
MENU
1 4 5
counterclockwise or
" "
Chapter 4
4.1 SWITCHING THE MONITOR ON/OFF
This ON/OFF button is used for switching the monitor on and off.
Note: The ON/OFF switch does not disconnect the device from the
mains voltage. To completely disconnect the mains voltage.
Please remove the power plug from the socket.
4.2 POWER INDICATOR
This indicator lights up green when the monitor operates normally.
If the monitor is in power saving mode, this indicator change to orange.
when monitor is turn off, this indicator change the color to dark.
4.3 VOLUME
(only for monitor with speaker function)
This feature adjust the DOWN button to decrease the volume and
UP button to increase the volume.
Important information on audio playback
To achieve optimum sound quality from the monitor speakers,
the audio cable should be connected to the Line-Out socket
(headphone socket) of the computer. If you connect the audio cable
to the Speaker-Out socket (soundcard) of the computer, Please set
the volume under Windows to range between 20% - 40% of the
maximum value to achieve optimum sound quality.

4.4 MENU FEATURES

The following features can all be accessed by using your monitor's on
screen menu system. Once are finished. Making adjustments to a feature,
selecting the exit icon to turn off the menu.
Please follow the procedure of selection and adjust an item using the OSD
system as below steps for main functions adjustment.
Step 1: Press the MENU button to activate the OSD menu.
The main menu appears on the screen with icons for the
setting functions.
Step 2: If necessary, use the
" "
other icon.
Step 3: Press the MENU button to activate the highlighted icon.
Step 4: Use the or button to make the desired setting.
" " " "
Step 5: Select the EXIT symbol to exit the OSD menu.
Step 6: Repeat step 2 through 5 to make further adjustments.
All changes are stored immediately
OPERATION Direct - Access Features
or " " button to mark an
4