Chapter 1 Introduction; General Information; Features; Checking List - YAKUMO TFT 17 XP Manual

Chapter 1

1.1 General Information

This monitor is a high-performance intelligent multi-scan TFT LCD color
monitor.
User friendly interface --- the easy and precise OSD control of multi- key button.
Brief appearance --- elegant and compact housing.
Footprint of all round tilting range --- employing sectional positioning ,well
Balanced in adjustment.
Analog input, plug and play facilities --- to accept RGB signal, with modulated
Frame rate control allowing over 20 different input formats.

1.2 Features

1. Microprocessor based with OSD (On Screen Display) control.
2. Compatible with standard IBM VGA ,extended VGA,super VGA, IBM XGA
modes, as well as VESA resolution standards.
3. Universal power supply. (100-240 Vac, 50/60Hz, 1.0A)
4. Microsoft windows 95/98/2000/ME/XP compatible & VESA Display Data
channel (DDC)1/2B compatible.
5. Safety model number:
17"(700P)

1.3 Checking List

Please make sure the following items are included with your LCD monitor:
Yakumo TFT 17 XP AC power cord
User manual Signal cable
If any of these items are missing, please contact with your dealer for
Technical support and customer service.
Note:
Be sure to save original box and all packing material for transport in future if the
Monitor need .
Introduction
1
Chapter 2

2.1 Install and uninstall the pedestal

To attach the base to your monitor, please following the steps for installation of the
pedestal as below:
step 1 step 2
2.2 Connect your monitor to computer
2.2.1 Turn off your computer and unplug its power cable.
2.2.2 Connect the signal cable to the video port on the back of your computer.
2.2.3 Connect the power cable for your monitor. ( to AC power jack)
2.2.4 Connect one end of the audio cable on the back of the connector to the sound
card of the computer output, (Only for monitor with speaker function)
2.2.5 Plug the computer and monitor power cables into a nearby outlet.
2.2.6 Turn your computer and monitor on, if your monitor display an image, you
have successfully installed the monitor. If the monitor does not display an
Image, check all the connections.
Note: (3) only for monitor with speaker function
Connecting the monitor to the computer and the power supply Connecting the monitor to the computer and the power supply
Installation
step 3
(2) AC Power cable
(1) VGA Signal Cable
(3) Audio in
2