Transferring Items Using Infrared; Sending Information - YAKUMO DELTAX GPS Manual

Starting and Ending a Wireless Network Connection
After you install the wireless network card and set up the wireless network, use
the desired program when you are within the range of wireless network. For
example, switch to Pocket Internet Explorer and browse to a Web page. Your
Yakumo deltaX GPS will automatically connect.
To end the connection, tap the icon
screen and tap
Disconnect
NOTE: When you have finished using the wireless network, complete the actions for
ending the connection. Leaving the wireless network module active will consume more
power.

6.2 Transferring Items Using Infrared

Using infrared (IR), you can send and receive information, such as contacts and
appointments, between two devices. In addition, you can use the IR port to
synchronize data with your desktop computer, in place of using the
synchronizing cable.

Sending Information

1. Switch to the program where you created the item you want to send and
locate the item in the list.
2. Align the IR ports so that they are unobstructed and within a close range.
CAUTION: If the devices are too far apart or if something blocks the path between the two
ports, data might not be sent or received correctly.
3. Tap and hold the item and tap
in the Navigation Bar of the Today
.
Beam Item
on the pop-up menu.
81