Pioneer Elite VSX-52 Operating Instructions Manual page 84

13 Additional information
Symptoms Causes
Audio playback is undesirably The audio file currently being
stopped or disturbed. played back was not recorded
in a format playable on this
receiver.
The LAN cable is currently dis-
connected.
There is heavy traffic on the
network with the Internet being
accessed on the same network.
When in the DMR mode, depend-
ing on the external controller
being used, playback may be
interrupted when a volume
operation is performed from the
controller.
There is a connection routed
through a wireless LAN on the
same network.
Cannot access Windows In case of Windows Media Player
Media Player 11 or Windows 11: You are currently logged onto
Media Player 12. the domain through your PC with
Windows XP or Windows Vista
installed.
In case of Windows Media Player
12: You are currently logged onto
the domain through your PC with
Windows 7 installed.
84
En
Remedies
Check whether the audio file was recorded
in a format supported by this receiver.
Check whether the folder has been dam-
aged or corrupted.
Note that there are cases where even the
audio files listed as playable on this receiver
cannot be played back or displayed (page
45).
Connect the LAN cable properly (page 22).
Use 100BASE-TX to access the components
on the network.
In this case, adjust the volume from the
receiver or remote control.
There may be a shortage of bandwidth on
the 2.4 GHz band used by the wireless LAN.
Make wired LAN connections not routed
through a wireless LAN.
Install away from any devices emitting
electromagnetic waves on the 2.4 GHz band
(microwave ovens, game consoles, etc.). If
this does not solve the problem, stop using
other devices that emit electromagnetic
waves.
Instead of logging onto the domain, log
onto the local machine (page 42).
Symptoms Causes
Cannot listen to Internet radio The firewall settings for compo-
stations. nents on the network are cur-
rently in operation.
You are currently disconnected
from the Internet.
The broadcasts from an Internet
radio station are stopped or
interrupted.
The Home Media Gallery can- The remote control is not cur-
not be operated with the but- rently set to the Home Media
tons on the remote control. Gallery mode.
SIRIUS radio messages
Status messages Causes
Antenna Error The SIRIUS antenna is not prop-
erly connected.
Check Sirius Tuner The SiriusConnect
properly connected.
Acquiring Signal The SIRIUS signal is too weak at
the current location.
Subscription Updating Unit is updating subscription.
Updating Channels Unit is updating channels.
Invalid Channel Selected channel is not available/
does not exist.
Firmware Updating The SiriusConnect
firmware is being updated.
Remedies
Check the firewall settings for components
on the network.
Check the connection settings for com-
ponents on the network, and consult with
your network service provider if necessary
(page 71).
There are cases where you cannot listen
to some Internet radio stations even when
they are listed in the list of Internet radio
stations on this receiver (page 42).
Press HMG to set the remote control to the
Home Media Gallery mode (page 42).
Remedy
Check that the antenna cable is attached
securely.
TM
tuner is not Check that the 8 pin mini DIN cable and AC
Adapter are attached securely.
Check for antenna obstructions and reposi-
tion the SIRIUS antenna to get better signal
reception. Use the Antenna Aiming option
to optimize the antenna position.
Wait until the encryption code has been
updated.
Wait until the encryption code has been
updated.
Select another channel.
TM
tuner's Wait for updating to finish.