Searching For Ini Values - Symantec WISESCRIPT PACKAGE EDITOR 8.0 - REFERENCE FOR WISE PACKAGE STUDIO V1.0 Reference

Searching for INI Values

WiseScript Package Editor Reference
2. Click Add at the right of the page and select Search for File.
The Search for File dialog box appears.
3. Complete the dialog box:
File Name
Enter the name of the file.
Description
Enter the message to display on the progress dialog box while searching.
Drives to Search
Select local hard drives only, network drives only, or both.
Search Depth
Set the search depth to zero to search the entire directory tree of the specified
volumes. A search depth of 2 or 3 is recommended when searching network
volumes.
4. Click OK.
To edit an entry, double-click its name. To rearrange the entry in the list, click the Move
Up and Move Down buttons.
See also:
System Search on page 77
WiseScript Package Editor only
On the System Search page, you can set up a search for a value in an .INI file on the
destination computer. Use this only to get an .INI value that you know to be a valid path
on the destination computer.
.INI File Terminology
An .INI file consists of sections with the following syntax:
[DirectoriesAndFiles]
SrcDir=E:\Application\
SrcFiles=E:\Application\Application.exe, E:\Sample\sample.dll
In the section above, DirectoriesAndFiles is an INI Section Name and SrcDir is an
INI Item Name.
Item Field refers to the number of the item in a comma-delimited list. Example:
The Item Field for E:\Sample\sample.dll in the section above is 2 because it is the
second item in the list.
To add an .INI file to the search list
1. Select Installation Expert > System Search page.
2. Click Add at the right of the page and select Read INI Value.
The Read INI Value dialog box appears.
3. Complete the dialog box:
Creating WiseScript Installations
78