Build Settings - Symantec WISESCRIPT PACKAGE EDITOR 8.0 - REFERENCE FOR WISE PACKAGE STUDIO V1.0 Reference

Build Settings

WiseScript Package Editor Reference
Center Horizontal
Place at Right
Scale to Screen
Mark this for the graphic to cover the same percentage of the screen regardless
of screen size.
Hide Progress Bar
Mark this to hide the progress bar during graphic display.
Center Vertical
Place at Bottom
Tile Background
Mark this to repeat the graphic edge-to-edge to fill the entire screen.
Erase All
Mark this to remove all previous graphics from the screen before displaying the
new one.
Timed Display
Mark this to display a series of graphics at evenly-spaced intervals, which is
calculated by the number of files to be installed. This is marked by default and
should remain marked for billboards to work correctly.
Note
If the billboards display too quickly during installation, mark the Slow
Installation Speed check box on the Build Settings page.
Local Graphic
Normally, you specify graphic files on your computer, which are then compiled
into the installation. Mark this to specify a file from the destination computer.
With this option, you can use variables in the Pathname field above. Example:
%INST% to indicate the directory from which the installation .EXE is running.
Use this to change graphics without rebuilding the .EXE.
5. Click OK.
The end user sees the billboards in the order in which they appear on the Billboards
page. To rearrange billboards, click Move Up and Move Down at the right of the page.
See also:
Display Billboard on page 147
WiseScript Package Editor only
Use the Build Settings page to specify options for compiling the WiseScript and to
specify a manifest file for WiseScripts that will run on Windows Vista or later operating
system.
Select Installation Expert > Build Settings page and complete the page:
Creating WiseScript Installations
41