Symantec ALTIRIS PATCH MANAGEMENT SOLUTION 7.0 SP2 - FOR MAC V1.0 Manual page 21

To ensure that Mac computers in your environment are always up to date, you
can configure automated rollout jobs to run on a schedule. For example, you can
configure the jobs to run weekly.
See "About installing software updates"
To install all updates
1 In the Symantec Management Console, on the Manage menu, click Jobs and
Tasks.
2
In the left pane, click Jobs and Tasks > System Jobs and Tasks > Software >
Patch Management > Mac > Automated Rollout Jobs.
3 Click the rollout job that you want to run.
4 In the right pane, under Task Status, click New Schedule.
5
In the New Schedule dialog box, configure a schedule for this automated
rollout job.
For example, configure the job to run weekly.
6 Under Input, click Add > Target.
7 In the Add Target dialog box, click Open.
8 In the Open dialog box, click All Patchable Mac Computers Target and then
click OK.
It is safe to run the rollout job on all supported Mac computers. When the
rollout job runs, it checks what updates are needed. If no updates are needed,
the job does not download and does not install any updates.
9
Click OK.
10 Click Schedule.
Installing software updates
Installing all updates
on page 19.
21