TP-Link TL-WA730RE User Manual page 28

Method Two: Enter the PIN into my AP
Step 1: Keep the QSS Status as Enabled and click the Add device button in Figure 4-2, then the
following screen will appear.
Step 2: Choose "Enter the new device's PIN" and enter the PIN code （take 16952898 for
example） of the wireless adapter in the field after PIN as shown in the figure above. Then
click Connect.
Note:
The PIN code of the adapter is always displayed on the QSS configuration screen as shown in the
following figure.
Step 3: For the configuration of the wireless adapter, please choose "Enter a PIN into my
access point or a registrar" in the configuration utility of the QSS as below, and click
Next.
TL-WA730RE 150Mbps Wireless Range Extender User Guide
The QSS Configuration Screen of Wireless Adapter
Figure 4-4
21