TP-Link TL-WA730RE User Manual page 20

Note:
If the above screen does not prompt, it means that your web-browser has been set to a proxy.
Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that
appears, cancel the Using Proxy checkbox, and click OK to finish it.
2. After successfully logging in, click the Quick Setup menu to quickly configure your AP and
the following figure will display. Click Next to continue.
3. And then Wireless page will appear shown in Figure 3-10. There are two Operation Modes,
including Range Extender and Access Point. The available setting options are different in
different operation modes, and they are explained below.
When you choose Range Extender, take the following steps:
A.
1） Click Search on the Wireless page shown as Figure 3-10 , and then AP List page will appear,
shown in Figure 3-11.
TL-WA730RE 150Mbps Wireless Range Extender User Guide
Figure 3-9 Quick Setup
Figure 3-10 Quick Setup - Wireless
13