Accessing The Network Through The Ppp Dial-Up Software On Your Computer - Huawei HG532c User Manual

3. Select DSL from the Link Type option button.
4. Select Enable for WAN connection.
5. Enter the VPI and VCI parameters that are provided by the network
operator in the VPI/VCI text boxes.
6. Select INTERNET from the Service list option button.
7. Select PPP(oE) from the Connection type drop-down combo box.
8. Enter the user name and password that are provided by the network
operator in the User name and Password text boxes, keep the default
settings of other parameters.
9. Click Submit.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer once only. The next time
when you power on your computer, you can surf the Internet without any configuration.
Accessing the Network Through the PPP Dial-Up
Software on Your Computer
If you select this method for accessing the network, you need to install and configure
the dial-up software on your computer. In addition, you need to perform dial-up
operations on your computer upon each startup. To configure the HG532c and your
computer for the network access, do as follows:
Step 1
Set the working mode of the HG532c to Bridge.
1. In the navigation tree on the left, choose Basic > WAN.
2. Click New to create a WAN connection.
3. Select DSL from the Link Type option button.
4. Select Enable for WAN connection.
5. Enter the VPI and VCI parameters that are provided by the network
operator in the VPI/VCI text boxes.
6. Select INTERNET from the Service list option button.
7. Select Bridge from the Connection type drop-down combo box.
8. Click Submit.
Step 2
Install and configure the PPP dial-up software on your computer.
The PPP dial-up software is pre-installed on certain computer operating
systems. To create a dial-up connection, do as follows:
1. Choose Start > All Programs > Accessories > Communications >
Network Connections.
2. Click Create a new connection in Network Tasks to display the New
Connection Wizard window, and then click Next.
3. Select Connect to the Internet, and then click Next.
4. Select Set up my connection manually, and then click Next.
5. Select Connect using a broadband connection that requires a user
name and password, and then click Next.
7