Digital Entertainer Elite EVA9000/9150 User Manual
Supervisor Functions Menu Screen
To go to the Supervisor Functions screen, press
functions. The Supervisor Functions menu screen offers these options:
•
Setup wizard. Enter or change the settings for the Digital Entertainer Elite.
•
Advanced settings. See
•
Full scan for media files. Rebuild the media library. This replaces current media files and
adds newfound media files. A full scan takes significant time, depending on the number of
folders you have designated for sharing.
•
Scan for USB attached media. Check for media stored on devices such as an iPod or MP3
player that are connected to the Digital Entertainer Elite.
•
Scan for hard drive media. Check for media stored on an internal hard drive device installed
in the Digital Entertainer Elite.
•
Hard Drive Tools. Format the drive or verify the health of the drive. See
on page
6-3.
•
Network test. Measure the data transfer rate between devices on your network and your
Digital Entertainer Elite.
•
Update. Check for firmware updates for the Digital Entertainer Elite on the NETGEAR
website, or update the firmware from a file on a USB storage device. See
Firmware" on page 7-1
Warning: Be sure that power to your Digital Entertainer Elite unit is not interrupted
Note: Following a firmware update, you may need to reload your media library into
the Digital Entertainer Elite from the backup location.
•
System Information. See
•
Restart. Restart the Digital Entertainer Elite.
6-2
"Advanced Settings" on page
for more information.
during the firmware update process. Failure to observe this precaution can
permanently damage the unit.
"System Information" on page
v1.0, March 2009
Home, and select More > Supervisor
6-3.
6-9.
Custom Setup and Supervisor Functions
"Hard Drive Tools"
"Updating the