NETGEAR EVA9150 - Digital Entertainer Elite User Manual page 42

Digital Entertainer Elite EVA9000/9150 User Manual
1. Power off the Digital Entertainer Elite using the on/off switch on the back of the unit.
2. Remove the disk tray as shown in the following figure.
Figure 4-2
a. Swing open the front cover.
b. Press to release the latch.
c. Pull out the tray.
3. For the EVA9150 only, remove the pre-installed hard disk from the tray.
a. Loosen and remove the four screws that secure the hard disk.
b. Set the four screws aside, and put the just-removed hard disk in a safe place.
4. For greater security, set the lock inside the tray before installing the new hard disk into the tray
(optional).
Figure 4-3
4-10
v1.0, March 2009
Listening and Viewing