JVC TM-A101GU - Multi-purpose Color Monitor Instructions Manual page 11

DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
You can set the following set-up menu items.
• H. POSITION
• WHITE BALANCE
Note:
● Parameter for H. POSITION can be set separately depending on the video input
(Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front
panel.
Select the required video input with the input select buttons on the front panel in
advance.
1. While pressing the MENU button, press the
CHROMA/PHASE button.
The <SET-UP MENU> screen is displayed.
CHROMA MENU
* The screen automatically disappears when no operation is
performed after about 5 minutes.
PHASE
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
A selection mark (4) is put next to the selected item.
CHROMA CONTRAST
Front panel
button
PHASE BRIGHT
CHROMA/
PHASE
H. POSITION
WHITE BALANCE CONTRAST/
BRIGHT
CONTROL LOCK
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
3. Press the VOLUME/SELECT buttons to set.
Front panel
VOLUME/SELECT button
Notes:
● To adjust the white balance, select WHITE BALANCE and
press the VOLUME/SELECT (+) or (–) button to display the
CUT OFF or DRIVE setting screen, then adjust each setting.
● Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
• CONTROL LOCK • INPUT REMOTE
• STATUS DISPLAY • ASPECT REMOTE
Function
displayed
Forward selection mark (
Reverse selection mark (
Function
displayed
+ Increase (to max. value)
VOLUME/
4 Forward the setting value
SELECT (+)
CUTO Selects CUT OFF setting screen
– Decrease (to min. value)
VOLUME/
1 Reverse the setting value
SELECT (–)
DRV Selects DRIVE setting screen
1
2
Contents
4 )
4 )
Contents
<SET-UP MENU> screen
<SET-UP MENU>
‰ H. POSITION
: 00
WHITE BALANCE
CONTROL LOCK : OFF
STATUS DISPLAY : ON
INPUT REMOTE : OFF
ASPECT REMOTE : OFF
EXIT
CHROMA CONTRAST VOLUME/SELECT MENU
PHASE BRIGHT
<Front panel buttons>
1
Selection mark (4): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
Forward the menu item.
Reverse the menu item.
– Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
4 Forward the setting value.
1 Reverse the setting value.
Exit the <SET-UP MENU>
EXIT
screen. (release)
DRV Selects DRIVE adjustment.
Selects CUT OFF
CUTO
adjustment.
Adjusts red and blue
RB
signal level.
Adjusts red, green and
RGB
blue signal level.
Turns the ON-SCREEN
display on or off. (This
DISP function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
3
4
9