Kenmore 28015 - Canister Vacuum Owner's Manual page 17

WARNING
Electrical Shock Hazard
Turn off and unplug vacuum cleaner
from electrical outlet. Do not operate
the vacuum cleaner without the motor
safety filter. Be sure the filter is dry and
properly installed to prevent motor
failure and/or electrical shock.
MOTOR SAFETY FILTER
ELECTROSTATIC
This filter must be replaced when dirty. It
should be replaced regularly depending on
use conditions_ The filter CANNOT be
washed as it will lose its dust trapping
ability.
NOTE: See PARTS AND FEATURES for
Motor Safety Filter number,
I, Remove the bag as outlined in the BAG
CHANGING section
2. Lift the rubber _ _L"_-_. _-'>.:_-_-_-_-_-_-_-_-_-_
retainer and pull out
motor safety filter as
shown
3. Re ace the fter, l, _:;
white side out, l_i_
facing the dust bag,
by sliding it back i!_!!
Into place under the ¢_!i
ribs in the bag !I
cavity. Tuck filter in _'_'_'_"_"_"
rY so that it fits
completely under the
rubber retainer.
4. Replace the bag as outlined in the BAG
CHANGING section.
,WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust
filter or without the exhaust filter
installed, Do not operate without filter
cover installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty Replace the filter when
the entire surface area is covered evenly.
The filter CANNOT be washed as it will
lose its dust trapping ability.
NOTE: See PARTS AND FEATURES for
exhaust filter number
1. Press latch
down to release
the exhaust filter
cover from slot in
canister.
3, Remove the
exhaust filter
using the recess
as shown_
Filter
Covet'
2. Pull filter
cover outward to
remove from
canister.
17