Dell PowerEdge 1650 Rack Installation page 12

At the back of the cabinet, pull back on the mounting-bracket flange until the
3
mounting hooks are located in their respective square holes, and then push down on
the mounting-bracket flange until the mounting hooks seat in the square holes and
the push button pops out and clicks.
Repeat steps 1 through 3 for the slide assembly on the other side of the rack.
4
Ensure that the rails are mounted at the same position on the vertical rails on each
5
side of the rack.
F i g u r e 1 - 5 .
front of rack
1-8
Rack Installation Guide
I n s t a l l i n g t h e R a p i d R a i l s S l i d e A s s e m b l i e s
slide assemblies (2)
push button
mounting hook
mounting-bracket
flange
support tab