Scanning; Saving Scanned Images - Canon CanoScan FB 630U User Manual

4. Scanning

Once the scanner is connected and the software is installed you are ready to scan. The scanning process is
very simple.
To scan a document:
1. Place the photo or document on the scanner as indicated in the scanner documentation.
2. Press the Start Button to launch CanoScan Toolbox CS.
3. Click on the Scan button from the Main window, or choose the New Scan command from the File
menu.
4. The Canon PI CS-S plug-in opens so you can select your scan settings.
5. Click the Preview button to preview the scanning area.
6. Click the Scan button to scan the document. The plug-in closes and the scanned image appears in a
new CanoScan Toolbox Image window.
7. Choose the Save command from the File menu to save the scanned image.

5. Saving Scanned Images

You can save any image that you scan and/or edit in the CanoScan Toolbox.
To save an image for the first time:
1. Choose Save from the File menu.
2. Enter a file name and select the folder and drive in which you want to save the image.
3. Specify the image format. When you choose JPEG or TIFF formats, an Options dialog box appears
so you can specify the compression level.
4. Click OK.
To save changes to an image that has already been saved on your computer, choose the Save command
from the File menu.
To save a file with a different name, to a different location or in a different file format, use the Save As
command.
CanoScan Toolbox for the Macintosh, 1.0 7