This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio's policy is one of continuous improvement, therefore design and specifications are subject to change without prior notice.
Directives when used and installed according to this instruction manual. 12. Use with only the cart, stand, tripod, bracket, or table For continued compliance only Cambridge Audio accessories should be specified by the manufacturer, or sold with the apparatus. used with this product and servicing must be referred to qualified service When a cart is used, use caution when moving the cart/ personnel.
Cambridge Audio product, it can be returned by your dealer to Cambridge Audio or an authorised Cambridge Audio service agent. You will need to ship this product in either Choose the installation location carefully. Avoid placing it in direct sunlight its original packaging or packaging affording an equal degree of or close to a source of heat.
Serial Number Label Removed Made under licence in China For input to a separate DAC, such as Cambridge Audio DacMagic*, or Use good quality interconnect cables from these sockets to any line level digital recording machine. To obtain best results, use a high quality input on your amplifier.
Adjust the volume on a SR10/AM10. Changes source on a SR10/AM10. Mutes the output of a SR10/AM10. Note: These controls work on the Topaz SR10/AM10 only and are not compatible with Cambridge Audio Azur amplifiers/receivers or units from other manufacturers.
CD 5 CD10 Operating instructions 4. To turn the Repeat function off, press the Repeat button either before or during playback until ‘RPT OFF’ appear on the display. 1. Press the Open/Close button. 2. When the disc tray has opened fully, place a disc carefully in the tray with the label side facing up.
CD 5 CD10 Troubleshooting Ensure the AC power cord is connected securely. Ensure the plug is fully inserted into the wall socket and is switched on. Check the unit is switched on at the rear panel. Check fuse in the mains plug or adaptor. Check the disc is not loaded upside down.