Axis CAMERA STATION 1.2 User Manual page 39

Allow clients to update
configuration
Show only one image
on playback
Sound on alarm
Enable proxy server
Get settings from
Internet Explorer
Proxy server
User/Password
Bypass proxy server for
local addresses
AXIS Camera Station User's Manual
Note that once this option is enabled, it will only be possible to play those
images that have been watermarked, i.e. images that are not watermarked
cannot be played.
Enable this if client users should be allowed to modify the current
configuration from AXIS Camera Station Client. See AXIS Camera Station Client,
on page 58 for more information.
This setting allows you to view recordings as one large image in the playback
window. If No is selected, the playback window will show the current frame in
the center of the window with the four preceding frames above it and the next
four frames below it.
Specify the path to and name of the sound file (WAV) to play on alarms. Or
click the search button to go Program Files | Axis Communications | AXIS
Camera Station | Sound to select a new sound file for your alarms.
Check this option if you want to enable the use of a proxy server. If you have
cameras outside your local network and a proxy server is used for external
network access, you must enable this setting.
Click to use the same proxy settings as Internet Explorer.
Enter the IP address or name of the proxy server, and port if applicable, e.g.
http://193.168.0.1:3128. Note that you cannot use an address to a script.
Enter the user and password as defined for your proxy server.
Check this option if you want the browser to the contact servers directly when
accessing local addresses.
AXIS Camera Station Administration
39