Views - Axis CAMERA STATION 1.2 User Manual

Views

Example: Define camera views
Example:
To configure 4 cameras,
select
To configure 8 cameras,
select
Default View
AXIS Camera Station User's Manual
Under the Views tab, you define which camera is displayed in which position, in
each different view.
1. Select view according
to the number of
cameras you want to
2. Select camera position
configure.
4. Repeat steps 2 and 3 for all cameras.
5. Click OK to save and exit.
1. Select a view by clicking a button on the left side of the window. The view
is now displayed, with its position numbered.
2. Click to select the position you wish to define for a certain camera. The
selected position is marked by a red border.
3. From the drop-down list of available cameras, select the camera to display
in this position. Repeat steps 2 and 3 for all cameras.
4. The quality of the video feed can be improved by increasing the Framerate
and lowering the compression value in Image Quality (Compression).
Specify the default view (0, 4, 6, 9, 10, 13 or 16) to display when AXIS Camera
Station is started. If this is set to 0, no live images are shown. The controls for
event search, etc. are still visible.
AXIS Camera Station Administration
3. Select camera
for camera
37