Macintosh Only: Set The Ip Address Manually - Axis QIG5800 Quick Start Manual

Step

Macintosh only: Set the IP Address Manually

3b
If you succeeded in logging in to your print server's web pages in Step 2, your print server has
already received a valid IP address. Skip to " Configure a Printer " (Step 4)!
In Macintosh, you set the IP address of the print server using a text editor:
Set the IP address:
1. Open the Chooser from the Apple menu.
2. Select a network printer driver, any LaserWriter will do.
3. Select the printer port which name ends with "_CFG" and to which you want to assign an
IP address.
4. Close the Chooser.
5. Open a text editor, e.g. SimpleText. Write a text file containing the IP address parameters
you want to set:
INT_ADDR.:192.16.253.80
6. Print the text file to the printer port you have chosen. The settings will be stored in the
print server.
7. Close the Chooser.
Note:
The _CFG port disappears 60 minutes after the AXIS 5800 Mobile has been powered on. If
you want it to reappear, you must restart your AXIS 5800 Mobile.
5