Key Features; Overview - Axis 26926R2 User Manual

Key features

Overview

Status
indicator
(LED)
Audio out
Cover
plate
Power Connector - For connection of the PS-H power adapter (included).
I/O Connector - The I/O terminal connector provides the physical interface to one transistor output, one digital
input and an auxiliary connection point for DC power. For more information, see The I/O Terminal Connector,
on page 33.
Network Connector - The camera connects to the network via a standard network connector. Supporting
NWAY, the camera detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). Supporting
PoE (Power over Ethernet), the camera can be powered directly from the network cabling.
Audio out- Audio output (line level), which can be connected to a public address (PA) system or an active
speaker with a built-in amplifier. A pair of headphones can also be attached. A stereo connector must be used
for the audio out.
Audio in - One 3.5mm input for a mono microphone, or for line-in mono signal (left channel is used from a
stereo signal).
Microphone - Built-in microphone.
To prevent unauthorized listening, the internal microphone can be disabled by inserting a plug in the 'Audio in'
connector.
Serial Number Label - The serial number may be required during installation.
Control Button - Press this button to install the camera using the AXIS Internet Dynamic DNS Service, or to
restore the factory default settings, as described in Resetting to the Factory Default Settings, on page 32.
AXIS 212 PTZ - Product Features
Camera unit
Microphone
Audio in
Dome casing
Control
button
Power
connector
Power
Network
indicator
indicator
(LED)
(LED)
Serial number (S/N)
The serial number is required
during the installation.
Please make a note of the
serial number and retain
for future reference.
6
I/O terminal
connector
Network
connector