Related Manuals for KUSSMAUL 091-75
Summary of Contents for KUSSMAUL 091-75
- Page 1 FILE: 091-75 REV.B DATE: 10-19-00 INSTRUCTION MANUAL LOAD MANAGER MARK IV A 10 CHANNEL SEQUENCER LOAD SHEDDING CONTROLLER MODEL# 091-75 INPUT: 12 VOLTS D.C. 3 YEAR WARRANTY...
- Page 2 INTRODUCTION: The Load Manager Mark IV is a 10-channel sequencer and load shedding controller controlling 10 external relays that are supplied by the installer. Provision has been made to permit the installer to sequence only a total of 5, 6, 7, 8, 9 or 10 channels.
- Page 5 PROGRAMMING: Recognizing that priorities may change after an installation is made, the LOAD MANAGER MARK IV is designed so that the priority of load shedding may be easily altered. Sequencing of the loads occurs at approximately ½ second intervals starting with the relay connected to terminal 1 and progressing to the relay connected to terminal 10.
- Page 6 SEQUENCE CONTROL: The installer wiring the relays to the LOAD MANAGER MARK IV controls load sequencing. In order to limit the sequencing to fewer than 10 channels a 5- element dipswitch has been provided. This switch locks out the sequencing function for channels 6, 7, 8, 9, and 10.
- Page 7 Vehicle Owner WARRANTY All products of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 3 years from the date the equipment was shipped.
Need help?
Do you have a question about the 091-75 and is the answer not in the manual?
Questions and answers