KUSSMAUL 091-32R-12 Instruction Manual

Eversible priority load manager a start-up and shut down load sequencer and automatic load shedding system

Advertisement

INSTRUCTION MANUAL
REVERSIBLE PRIORITY
LOAD MANAGER
A START-UP AND SHUT DOWN
LOAD SEQUENCER AND
AUTOMATIC LOAD SHEDDING SYSTEM
MODEL #091-32R-12
3 YEAR WARRANTY
KUSSMAUL ELECTRONICS CO., INC
170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796
TEL: in NY 631-567-0314
631-567-0314
631-567-0314
631-567-0314
631-567-0314
TOLL FREE: 800-346-0857
800-346-0857
800-346-0857
800-346-0857
800-346-0857
BOOK# 091-32R-1
.
FAX: 631-567-5826
631-567-5826
631-567-5826
631-567-5826
631-567-5826

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 091-32R-12 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KUSSMAUL 091-32R-12

  • Page 1 LOAD MANAGER A START-UP AND SHUT DOWN LOAD SEQUENCER AND AUTOMATIC LOAD SHEDDING SYSTEM MODEL #091-32R-12 3 YEAR WARRANTY KUSSMAUL ELECTRONICS CO., INC 170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796 TEL: in NY 631-567-0314 631-567-0314 631-567-0314 631-567-0314 TOLL FREE: 800-346-0857...
  • Page 2 INTRODUCTION The LOAD MANAGER is a device which: 1. Sequentially energizes and deenergizes relays at approximately 1/2 second intervals in order to reduce transients in a vehicle’s electrical system. 2. Detects when the vehicle’s electrical load is greater than the output of the alternator.
  • Page 3 NOTE The LOAD MANAGER is designed to operate relays. It is not necessary The LOAD MANAGER is designed to operate relays. It is not necessary The LOAD MANAGER is designed to operate relays. It is not necessary The LOAD MANAGER is designed to operate relays. It is not necessary The LOAD MANAGER is designed to operate relays.
  • Page 5 Figure 2, Basic Jumper Settings...
  • Page 6 Figure 3, Outline, load Manager...
  • Page 8 Vehicle Identification Vehicle Owner WARRANTY All products of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 3 years from the date the equipment was shipped.

Table of Contents