KUSSMAUL 091-22F Installation Instructions

Fuse
The Auto Current F detects current and closes a
switch when the sensed current flows to provide a
remote indication. An electronic flasher interrupts
the indicator output approximately once per second
to provide a flashing indication.
Designed for applications where a remote indicator
must be illuminated when one or more lights or other
loads are energized. By detecting load current any
one , or more than one lamp, or other load will cause
the indicator to light. The indicator circuit contains
a relay which is operated by the sensor and flashing
circuit. Indicator currents as high as 5 amperes may
be driven by the relay.
KUSSMAUL ELECTRONICS CO., INC.
170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796
TEL: in NY 631-567-0314

AUTO CURRENT

D.C. CURRENT SENSOR

INSTALLATION INSTRUCTIONS
S1
Chassis
Ground
Chassis
Ground
TOLL FREE: 800-346-0857
Compartment
Lights
Loads
Indicator
Lamp

ORDERING INFORMATION

MODEL RESIST
MIN. OPER.
NUMBER OHMS
091-22F-2 .01
091-22F-3 .01
091-22F-5 .02
F
Door
Switch
Door
Switch
Loads
SWITCH
MAX. OPER.
AMPS AMPS
RATING 12V
1.0 30 5 AMP
.25 30 5 AMP
.25 10 5 AMP
FAX: 631-567-5826
Chassis
Ground
Chassis
Ground