Scanning In Advanced Mode - Canon 2923B003 On-Screen Manual

Scanning in Advanced Mode

>
On-Screen Manual Scanning Guide
in Advanced Mode
Scanning in Advanced Mode
In Advanced Mode, you can specify the color mode, output resolution, image brightness, color tone, etc.
when scanning documents.
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Starting ScanGear (Scanner Driver)
Important
Place the document face-down on the Platen and align an upper corner of the document with
the corner at the arrow of the Platen.
2.
Click Advanced Mode.
The Advanced Mode tab appears.
Note
Settings are not retained when you switch between modes.
3.
Set Paper Size and Color Mode.
Note
See " Input Settings
4.
Click Preview.
Preview image appears in the Preview area.
> Scanning with Advanced Settings Using ScanGear (Scanner Driver)
" for details on Paper Size and Color Mode.
Sayfa 157 / 268 sayfa
> Scanning