Using The Stamp Tool; Using The Shape Tool - ArcSoft 3000F - CanoScan Scanner User Manual

8
Using Painting and Retouching Tools
2. Open the Options Palette.
3. Choose a color model: RGB or HSV.
4. Set the number of pixels to be sampled.
5. Click in the part of the image to be sampled.

Using the Stamp Tool

The Stamp Tool paints in the active color with a predefined piece of clipart or other design.
To use the Stamp Tool:
1. Click the Stamp Tool in the Tools Palette.
2. Open the Options Palette.
3. Check draw from center to start the design from the center of the area to be painted.
4. Check default size to paint the design with its predefined dimensions.
5. Drag the transparency slider to set the transparency percentage.
6. Click on the desired design.
7. Click or drag in the image to apply the selected clipart or design.
Note: Once a design is applied in an image, it cannot be repositioned. Therefore, it's recommended that
you use the Rulers and Grids under the View menu to help position and align the design within the
image.

Using the Shape Tool

The Shape Tool crops the image using a predefined shape.
To use the Shape Tool:
1. Click the Shape Tool in the Tools Palette.
2. Open the options Palette.
3. Check draw from center to start painting the design from the center of the area to be painted.
4. Check default size to paint the design with the predefined dimensions.
5. Drag the transparency slider to set the transparency.
6. Click on the desired design.
7. Click or drag in the image to crop the image.
8-6 Using Painting and Retouching Tools