Zooming In And Out; Using The Pan Tool And Scroll Bars; Showing Rulers And Grids - ArcSoft 3000F - CanoScan Scanner User Manual

5
Viewing Images

Zooming In and Out

PhotoStudio's zoom options allow you to view images from 6% to 1600% of their actual size.
To use the Zoom Tool:
1. Click the Zoom Tool on the Tools Palette.
2. To zoom in, left-click the portion of the image to be seen in greater detail.
3. To zoom out, right-click in the image, and choose Zoom Out from the shortcut menu.
To zoom in or out at a specific ratio:
1. Click View on the Main Menu.
2. From the drop-down menu, do one of the following:
• To zoom in, click Zoom In and choose a ratio from the submenu.
• To zoom out, click Zoom Out and choose a ratio from the submenu.

Using the Pan Tool and Scroll Bars

When zooming in on an image, you may want to focus on an area that extends beyond the boundaries of
the image window. In this case, use the Pan Tool or image window scroll bars to reveal the hidden areas
of the image.
To reposition an image with the Pan Tool while zoomed in:
1. Choose the Pan Tool from the Tools Palette.
2. Drag the image to navigate to the area of focus.
To reposition the image with the scroll bars while zoomed in:
1. Choose the Pan Tool from the Tools Palette.
2. Click the scroll arrows or drag the scroll bar to navigate to the area of focus.

Showing Rulers and Grids

To align artwork in an image window, use the Rulers and Grids commands. PhotoStudio's Rulers and
Grids enable the layout of multiple images precisely across the width or length of the image.
To show rulers, do one of the following:
• Press Ctrl + R on your keyboard.
• Click View on the Main Menu, and choose Rulers from the drop-down menu.
To show grids:
• Click View on the Main Menu, then choose Grids from the drop-down menu.
Chapter 1
Introduction
Viewing Images 5-3