Shortcut Keys - ArcSoft 3000F - CanoScan Scanner User Manual

3
Learning Basic Editing Commands
resolution to change its existing resolution.
5. Click OK to confirm, or press Cancel to abort the operation.
Note: If Keep Aspect Ratio is checked, enter a value for either the width or height.

Shortcut Keys

01. To open an image file, press Ctrl + O.
02. To close an active image, press Ctrl + F4.
03. To save your file, press Ctrl + S.
04. To print an image, press Ctrl + P.
05. To quit PhotoStudio, press Ctrl + Q.
06. To undo an operation, press Ctrl + Z.
07. To undo a series of operations, repeatedly press Ctrl + Z.
08. To cut a selected area or the entire image, press Ctrl + X.
09. To copy a selected area, press Ctrl + C.
10. To paste a cut or copied area, press Ctrl + V.
11. To remove a selected area, press the Delete key.
12. To select the entire layer of an active image, press Ctrl + A.
13. To invert a selected area, press Ctrl + I.
14. To deselect the current selection, press Ctrl + N.
15. To open the Brightness and Contrast dialog box, press F3.
16. To open the Hue and Saturation dialog box, press F4.
17. To open the Tone Adjustment dialog box, press F5.
18. To access the PhotoStudio online Help, press F1.
19. To open an image into Full Screen mode, press Ctrl + W. To return to
normal mode, press the Esc key.
20. While in Full View mode (Ctrl + W), press the Enter key to advance to the
next opened image, or click the right mouse button for more options.
21. To display rulers of an active image, press Ctrl + R.
3-8 Learning Basic Editing Commands