Table of Contents
Advertisement
GO BACK Moves you back and forth between the last two channels selected in either
DIRECTV mode or TV mode. For example, if you have been viewing both DIRECTV and TV
channels (and thus using both the DIRECTV and TV "modes"), pressing GO BACK while
watching a DIRECTV
®
channel moves you back to the last DIRECTV
Pressing it while watching a TV channel moves you to the last TV channel you viewed. In
the menu system, pressing GO BACK returns you to the previous menu screen.
(Light Bulb Button) Press to illuminate some of the remote control's buttons. To conserve
battery power, the light turns off after several seconds.
GUIDE When in TV mode, brings up the TV program guide. In DIRECTV mode, brings up
®
the DIRECTV
programming guide. Subsequent presses of the GUIDE button scroll through
the different types of guides. Press GUIDE after pressing INPUT to get a guide-like list of
available video input channels.
INFO Brings up channel and viewing information via the channel banner. Quickly press
again to bring up an extended channel banner and press a third time to remove the
banner. Press when in the program guides to get more information on the highlighted
program or channel.
ARROWS
Used to point to different items in the menu system and adjust the menu
controls. Also move the PIP window when no menus are on the screen.
OK When in the menu system and other on-screen displays, selects highlighted items.
MENU Brings up the main menu and selects highlighted items. When in using an RCA,
GE, or PROSCAN VCR and in VCR mode, it functions as a PROGRAM button.
CLEAR Removes on screen displays and returns to normal viewing. If no displays are
present and the skip timer is set, CLEAR will cancel the commercial timer.
DIGIT BUTTONS (0 - 9) Enters channel numbers and time settings directly though the
remote control. For more information on entering digits to change channels, see the
section "Basic TV Operation." When in the menus, the digit buttons can be used to directly
select items without using the arrows. 0 can be used to return to the previous menu
screen.
INPUT
Toggles through the available external input sources.
ANTENNA Switches the source of the off-air signal between the HDTV's ANTENNA A
and B. When in VCR mode, the ANTENNA button also functions as a TV/VCR button.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides
transport control for some remote-controllable VCRs, DVD players, laserdisc players, tape
decks, and CD players when the remote is in that mode. When in TV or DIRECTV mode,
FORWARD will toggle through screen formats.
PIP (Picture-in-Picture) When viewing an analog signal, brings up the small PIP window.
Press again to hide PIP.
SWAP Exchanges the main analog picture with the analog PIP window.
CH CTRL (Channel Control) Selects the picture window (either the main or PIP window)
that will change when you press the CH +, CH -, INPUT, or digit buttons on the remote
control.
WHO Toggles through user profiles.
Chapter 2
Using the Remote
®
channel you viewed.
Don't worry about
getting stuck inside a
menu. Pressing the CLEAR
button on the remote
control takes you out of
the menu system.
21
Advertisement
Table of Contents
