Adding Custom-Labeled Buttons; Changing The Settings For Your Harmony Remote; Learning Infrared (Ir) Commands - Logitech Harmony 520 - Harmony 520 Advanced Universal Remote User Manual

Harmony 520

Adding Custom-Labeled Buttons

You can also add any number of custom-labeled buttons to an Activity.
To add a custom-labeled button for an Activity:
1. Connect your Harmony remote to your computer to start the Harmony remote software.
2. Click Activities.
3. Click an Activity.
4. Click Change the Behavior of Buttons.
5. Under the Custom Button Label column, type the name for the button label you would like to
appear on the display.
6. Select a command from the list in the appropriate device column, next to the name of the button
you want to set.
7. Click Done.
Note: Custom-labeled buttons are displayed on the Harmony remote's display from left to right,
top to bottom.

Changing the Settings for your Harmony Remote

Click Remote Preferences, select Settings, and then click Next to change the remote's settings:
•
Turn on/off Harmony Assistant (for additional information, see
Remote.)
•
Select the type of help to display on the remote (for additional information, see
Your Harmony
•
Set the backlight timing (for additional information, see
•
Show/Hide the "Starting Activity" message (for additional information, see

Learning Infrared (IR) Commands

The Harmony remote can learn infrared commands from other remote controls, and should only be used
in situations where the Harmony remote's database does not already contain an infrared command you
would like to use.
Determine the device you would like to send the infrared command to:
1. Connect your Harmony remote to your computer to start the Harmony remote software.
v. 1.2
Remote.)
User Manual
Displaying Help on Your Harmony
Using the Glow Button.)
Selecting an
Displaying Help on
Activity.)
page 9