Attach The Antenna Cable - Hughes DIRECTV GAEB0 Owner's Manual

Attach the antenna cable

2
Getting started
You can configure your system several ways, depending on what additional
components (such as a VCR, DVD player, or A/V receiver) you select. For now,
however, use the simplest configuration to check your antenna and cabling.
• Ensure that the DIRECTV Receiver is not plugged into an electrical outlet.
• Attach the RG-6 coaxial antenna cable to the
the back of the DIRECTV Receiver. Refer to the appropriate figure below
and on the next page.
Table 1: Rear panel connections - DIRECTV Receiver model GAEB0
1 SATELLITE IN connector
2 RF REMOTE antenna jack
3 TV ANTENNA/CABLE IN connector
4 OUT TO TV connector
5 AUDIO OUTPUT (R) jack
Table 2: Rear panel connections - DIRECTV Receiver model GCEB0
1 SATELLITE IN connector
2 RF REMOTE antenna jack
3 DIGITAL AUDIO OUTPUT optical jack
4 OUT TO TV connector
5 TV ANTENNA/CABLE IN connector
6 AUDIO OUTPUT (R) jack
7 AUDIO OUTPUT (R) jack
8 AUDIO OUTPUT (L) jack
SATELLITE IN connector on
6 AUDIO OUTPUT (L) jack
7 VIDEO OUTPUT jack
8 S-VIDEO jack
9 TELEPHONE JACK
1 AC POWER CORD
0
9 AUDIO OUTPUT (L) jack
10 VIDEO OUTPUT jack
11 VIDEO OUTPUT jack
12 S-VIDEO jack
13 VCR CONTROL cable jack
14 TELEPHONE JACK
15 AC POWER CORD