Configuring As Wlan Client Adapter; Quick Start To Configure - Alfa Network WLAN Outdoor Bridge AWAP08O-11gHP User Manual

Configuring as WLAN Client Adapter

This device can be configured as a wireless Ethernet adapter. In this mode,
the device can connect to the other wireless stations (Ad-Hoc network type)
or Access Point (Infrastructure network type) and you don't need to install
any driver.

Quick start to configure

Step 1. In "Basic Settings" page, change the Mode to "Client" mode. And key in the
SSID of the AP you want to connect then press "Apply Changes" button to
apply the change.
1.
Step 2. Check the status of connection in "Status" web page
2.
3.
40